Shelf life: 18 months
Product dosage: 250g, the usable area is about 0.3 square meters
Net content: 250g
Main ingredients: wall adhesive, calcium carbonate, waterproof resin, etc
Scope of application: used to repair white wall damage, cracks, scratches, hollowing, peeling, nail holes, cracks and other wall problems
matters needing attention:
1. Damaged surfaces such as peeling, hollowing, peeling and pulverization must be cleaned
2. The drying and curing time depends on weather conditions, coating thickness and area size, and there is no accurate time
3. If the repaired pit is too large, please apply it several times. After the previous scratch is completely dry, you can apply it again
4. If the wall patching paste becomes hollow after drying, it can be applied again
5. Before construction, please take ground protection measures to avoid affecting cleanliness
6. If it is not used up, please tighten the cap and store it in a cool and dry place
7. Keep it out of reach of children and pets
8. Apply thinly for many times, and cracks are likely to occur if the coating is too thick at one time
9. The paste color is white (the whiteness is 80%), and the normal white wall will not have too much color difference, but because of the difference between the old wall and the new wall, we can not match the whiteness of each wall. It is recommended that after receiving the goods, we apply a small amount of it to the wall for test, and then use it in a large area after the color and repair effect are approved
10. The coating surface must be solid and free of floating ash
usage method:
1. Unscrew the cover of wall patching paste and squeeze out the wall patching paste
2. Apply the non-looting cream to the place to be repaired
3. Apply the paste evenly with a scraper
4. If it is a deep pit or hole, you can cut the hose to make it fit the repair place, then apply the wall repair paste to the place to be repaired, and then apply the surface evenly with a scraper
5. If it is a large area of repair, the tail of the wall paste can be cut to increase the weight of the material